Different Size Originals

This mode enables you to copy different size originals (A3 and A4) together.
IMPORTANT
Paper Size in which the width of leading edge of each page are different (e.g., A3 and A5) cannot be fed together.
Always smooth out any folds in your originals before placing them into the feeder.

1.
Press [Copy].
2.
Press [Options] → [Different Size Originals].
3.
Select the type of different size originals → press [OK] → [Close].
[Same Width]:
Press this if you are placing originals with the same width.
[Different Width]:
Press this if you are placing originals with a different width.

IMPORTANT
For information on the modes which cannot be set in combination with this mode, see "Unavailable Combination of Functions."
If the originals are placed in the feeder, make sure that the different size originals are of the same weight (paper type).
If you set the Different Size Originals mode, the scanning speed may be slower than normal.
NOTE
If you use [1-Sided2-Sided] with [Different Size Originals], copies will be printed as one-sided copies on paper of their respective sizes.
12HJ-0LU