Clearing Staple Jams

If staples are jammed inside the optional Inner Finisher-B1, remove the jammed staples as described below.
1
Open the front cover of the finisher.
2
Grasp the staple case by the green tab to lift and pull it from the stapler unit.
3
Release the metal part on the front side of the staple case and lift it as far as it will go.
When releasing the metal part of the staple case, be careful not to cut your fingers on the staples.
4
Slide and remove the full row of jammed staples remaining in the slot.
5
Return the metal part of the staple case to its original position.
Make sure that the metal part clicks into place.
6
Return the staple case to its original position in the stapler unit.
Make sure that the staple case clicks into place.
7
Close the front cover of the finisher.
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
NOTE
As soon as the cover is closed, the stapler unit automatically conducts several dry fires to reposition the staples.
0Y1R-08C