Inner 2 Way Tray-G1
If you attach the Inner 2 Way Tray-G1 to the machine, prints can be delivered to both the main tray and the Inner 2 Way Tray-G1.
|
IMPORTANT
|
|
To use the Inner 2 Way Tray-G1 with the imageRUNNER 2525/2520, the optional 2 Way Unit-B1 is also required.
The Inner 2 Way Tray-G1 cannot be installed with the optional Inner Finisher-B1.
The Inner 2 Way Tray-G1 must be enabled prior to use. (Other System Settings)
If the Inner 2 Way Tray-G1 is attached, you must enable the functions for Tray B so that the machine can deliver the prints to it. (Common Settings)
|
Main Output Tray (Tray A)
Prints are output to this tray.
Inner 2 Way Tray (Tray B)
Prints are output to this tray.