Adjusting Sharpness

This mode enables you to adjust the sharpness level.

Low

If you use the Photo mode to make copies of an original containing halftones, such as a printed image, the moiré effect (a shimmering, wavy pattern) may occur. You can lessen this moiré effect and produce a clearer copy by using [Low] as the setting.

High

This setting enhances the edges of original images so that faint or fine text is reproduced with a sharper contrast. This setting is particularly suited for copying blueprints and faint pencil drawn images.
NOTE
The default setting is middle (center).
1
Place your originals → press [Special Features].
2
Press [Sharpness].
3
Press [Low] or [High] to adjust the sharpness → press [OK] → [Done].
To copy originals containing printed images or other halftones, the setting should be towards [Low].
To copy text or lines clearly, the setting should be towards [High].
The display returns to the top screen.
4
Enter the desired copy quantity (from 1 to 999) using  -  (numeric keys).
5
Press  (Start).
Copying starts.
NOTE:
To cancel this setting, press [Special Features] → [Sharpness] → [Cancel].
To cancel all settings and return the machine to the Standard Settings, press  (Reset).
2YRJ-01X