Editing the Forwarding Settings

You can register, edit, or delete the conditions for forwarding received documents.
IMPORTANT
Specifying the Forwarding Settings is available only when the Remote UI is in the System Manager Mode.
NOTE
For instructions on how to edit the forwarding settings on the machine’s control panel, see Setting the Send Function.
1
Click [Add.Func.] → [Forwarding Settings] in the [Add.Func.] menu.
The Forwarding Settings page is displayed.
2
Edit the forwarding settings.
To register a new forwarding condition:
1
Click [] (Add New Conditions) on the page shown in step 1.
The Add New Conditions page is displayed.
2
Specify the necessary settings → click [OK].
NOTE:
For information on the settings, see Setting the Send Function.
To forward all received documents without specific conditions:
1
Click [Forwarding without Conditions] on the page shown in step 1.
The Add New Conditions page is displayed.
2
Specify the necessary settings → click [OK].
NOTE:
For information on the settings, see Setting the Send Function.
To edit the forwarding condition:
1
Click the name of the forwarding condition that you want to edit on the page shown in step 1.
If you select [All] in the [Receive Type] drop-down list box, all the forwarding settings registered in the machine are displayed.
The Edit Conditions page is displayed.
2
Edit the settings as necessary → click [OK].
To delete the forwarding condition:
1
On the Forwarding Settings page shown in step 1, click [] (Select) next to the forwarding condition that you want to delete → [] (Delete the Selected Conditions).
The selected forwarding condition is deleted.
2YRJ-055