Installing Drivers with Plug and Play
You can specify functions suitable for the print and fax options installed in the machine, so your computer detects and installs drivers that are compatible with the specified functions.
|
IMPORTANT
|
|
Changes made to PDL Selection (Plug-n-Play) become effective when the machine is restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, “Before You Start Using the Machine,” in the User’s Guide.
|
|
NOTE
|
|
If the desired driver does not exist in your computer, it cannot be detected or installed.
|
1
Press 
(Additional Functions) → [System Settings].
(Additional Functions) → [System Settings].
2
Press [
] or [
] until [PDL Selection (Plug-n-Play)] appears → press [PDL Selection (Plug-n-Play)].
] or [] until [PDL Selection (Plug-n-Play)] appears → press [PDL Selection (Plug-n-Play)].
3
Select [UFRII LT], [PCL5e], [PCL6], [FAX] or [PS3] → press [OK].
The screen shot above may differ from the actual display depending on the machine configurations.
4
Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.