NOTE
|
The default setting is ‘A’ (Auto).
|
1
|
Make sure that [A] is highlighted on the touch panel display. If not, press [A].
NOTE:
The automatic copy density adjustment may not work with transparencies. In this case, adjust the density manually by pressing [Light] or [Dark].
|
1
|
Press [Light] or [Dark] to adjust density.
Press [Light] to move the indicator to the left to make the density lighter, or press [Dark] to move the indicator to the right to make the density darker.
NOTE:
You can adjust the density within nine levels.
|
IMPORTANT
|
No more than one of these three modes (Text, Text/Photo, and Photo) can be selected at a time. If you select one of these modes, the previously set mode is canceled.
If you make copies of an original containing halftones, such as a printed photograph, using the Photo mode, the moiré effect (a shimmering, wavy pattern) may occur. You can lessen this moiré effect by using the Sharpness mode. (Adjusting Sharpness)
|
NOTE
|
The default setting is ‘Text/Photo’.
When one of the three modes (Text, Text/Photo, and Photo) is selected, the automatic copy density adjustment is not available. Adjust the copy density manually, if necessary.
If the original is a transparency, adjust the density manually after selecting the type of original.
|