IMPORTANT
|
To use the 2 to 2-Sided and 2 to 1-Sided Copying modes with the imageRUNNER 2545W/2535W/2530W/2525W/2520W, the optional Feeder (DADF-AA1/-AB1) is required.
Paper used to make two-sided copies must conform to the following specifications:
Paper size: A4, A4R, A3, A5R, B4, B5, or B5R
Paper type: Plain, Recycled, 3-hole punch paper (Only A4, A4R, LTR, or LTRR is available.), Color
Paper weight: 64 to 90 g/m2
|
NOTE
|
You can make 2 to 2-sided or 2 to 1-sided copies without the feeder if you place and turn the originals on the platen glass. Using the feeder, however, enables you to perform copying faster and easier using the 2 to 2-Sided or 2 to 1-Sided mode.
|
IMPORTANT
|
The 1 to 2-Sided mode cannot be used with the 2-Page Separation mode.
Make sure to place originals with a horizontal (landscape) orientation, such as A4R, horizontally. If these originals are placed vertically, the back side of the original is copied upside down.
|
NOTE
|
If there is an odd number of originals, the back side of the last copy is left blank. (The machine’s counter does not count the blank page as one copy.)
If the 1 to 2-Sided mode is used with the Different Size Originals mode, the copies of differently sized originals will be printed as one-sided copies on paper of their respective sizes. If you want to make two-sided copies with differently sized originals, you must select the paper size beforehand. (Manual Paper Selection)
If the 1 to 2-Sided mode is used when the 2 on 1 mode in the Image Combination mode is set to ‘On’ for copying four-page originals, two pages of the original are printed on one side of the paper, and the other two pages are printed on the other side.
|
IMPORTANT
|
The 2 to 2-Sided mode cannot be used with the 2-Page Separation mode.
|
NOTE
|
Attaching the optional Feeder (DADF-AA1/-AB1) to the imageRUNNER 2545W/2535W/2530W/2525W/2520W enables you to perform copying faster and easier using the 2 to 2-Sided mode.
|
IMPORTANT
|
The 2 to 1-Sided mode cannot be used with the 2-Page Separation mode.
Make sure to place originals with a horizontal (landscape) orientation, such as A4R, horizontally. If these originals are placed vertically, the back side of the original is copied upside down.
|
NOTE
|
Attaching the optional Feeder (DADF-AA1/-AB1) to the imageRUNNER 2545W/2535W/2530W/2525W/2520W enables you to perform copying faster and easier using the 2 to 1-Sided mode.
|
IMPORTANT
|
The Book to 2-Sided mode cannot be used with the 2-Page Separation, Image Combination, Binding Erase, or Different Size Originals modes.
If you select ‘Front/Back 2-Sided’, the front side of the first two-sided page and the back side of the last two-sided page are left blank. (The machine’s counters do not count the blank pages as copies.)
Place your original on the platen glass. The Book to 2-Sided mode cannot be used when the original is placed in the feeder.
|
NOTE
|
You cannot select nonstandard paper that is loaded in the stack bypass.
|
IMPORTANT
|
The 2 to 2-Sided and 2 to 1-Sided Copying modes are available on the imageRUNNER 2545W/2535W/2530W/2525W/2520W only when the optional Feeder (DADF-AA1/-AB1) is attached.
|
1
|
Place your originals into the feeder or on the platen glass.
NOTE:
You can make 1 to 2-sided and 2 to 2-sided copies with the platen glass by manually replacing or turning over the originals. Follow the instructions that appear on the touch panel display when pressing (Start).
|
1
|
Place your originals into the feeder.
|
1
|
Press [Book Type] or [Calendar Type] to select the orientation type of the copies → press [Done] → [OK].
|
1
|
Press [Book Type] or [Calendar Type] to select the orientation type of the originals and the copies → press [Done] → [OK].
|
1
|
Press [Book Type] or [Calendar Type] to select the orientation type of the originals → press [Done] → [OK].
|
NOTE
|
To cancel this setting, press [2-Sided] → [Cancel].
To cancel all settings and return the machine to the Standard Settings, press (Reset).
|