IMPORTANT
|
Specifying the Forwarding Settings is available only when the Remote UI is in the System Manager Mode.
|
NOTE
|
For instructions on how to edit the forwarding settings on the machine’s control panel, see Setting the Send Function.
|
1
|
Click [] (Add New Conditions) on the page shown in step 1.
The Add New Conditions page is displayed.
|
2
|
Specify the necessary settings → click [OK].
NOTE:
For information on the settings, see Setting the Send Function.
|
1
|
Click [Forwarding without Conditions] on the page shown in step 1.
The Add New Conditions page is displayed.
|
2
|
Specify the necessary settings → click [OK].
NOTE:
For information on the settings, see Setting the Send Function.
|
1
|
Click the name of the forwarding condition that you want to edit on the page shown in step 1.
If you select [All] in the [Receive Type] drop-down list box, all the forwarding settings registered in the machine are displayed.
The Edit Conditions page is displayed.
|
2
|
Edit the settings as necessary → click [OK].
|
1
|
On the Forwarding Settings page shown in step 1, click [] (Select) next to the forwarding condition that you want to delete → [] (Delete the Selected Conditions).
The selected forwarding condition is deleted.
|