NOTE
|
Key pairs and digital certificates can be installed from a web browser (Remote UI). (Managing Jobs and Machine Data)
Key pairs and digital certificates can be registered both with the control panel and from a web browser (Remote UI).
You cannot set EAP-TLS and EAP-TTLS/PEAP at the same time.
|
NOTE
|
Before you select the IEEE802.1X Settings, make sure that the required key pairs and digital certificates are registered in the machine. (Managing Key Pairs and Digital Certificates)
If you are going to select EAP-TLS, install and register the key and certificate beforehand. (Managing Jobs and Machine Data)
|
1
|
Press [On] for <Use TLS>.
|
2
|
Press [Key and Cert.].
|
3
|
Select the key pair you want to use → press [Set as Def. Key].
NOTE:
If you want to check the details of each certificate, select the desired key pair and press [Cert. Details]. On the Certificate Details page, pressing [Cert. Verif.] enables you to check whether the selected certificate is expired or not.
If you want to check what a key pair on the list is being used for, select the desired key pair and press [Display Use Loc.].
|
4
|
Press [Yes].
|
5
|
Press [Done] to return to the IEEE802.1X Settings screen.
|
6
|
Press [OK].
|
1
|
Press [On] for <Use TTLS>.
|
2
|
Press [MSCHAPv2] or [PAP] to select the internal authentication protocol → press [OK].
|
3
|
Press [User] → enter the user name (up to 24 characters) specified on the RADIUS server. If you want to set the login name as the user name, press [Login Name as User Name].
|
4
|
Press [Password] → enter the user password (up to 24 characters) specified on the RADIUS server.
|
5
|
Press [OK].
|
1
|
Press [On] for <Use PEAP>.
|
2
|
Press [User] → enter the user name (up to 24 characters) specified on the RADIUS server. If you want to set the login name as the user name, press [Login Name as User Name].
|
3
|
Press [Password] → enter the user password (up to 24 characters) specified on the RADIUS server.
|
4
|
Press [OK].
|