Feeder (DADF-AA1/-AB1)
Originals placed in the feeder are automatically fed sheet by sheet to the scanning area. The feeder also automatically turns over two-sided originals to make one- or two-sided copies.
|
|
|
Do not insert your fingers into the gaps around the original supply tray, as your fingers may get caught.
|
|
IMPORTANT
|
|
The Feeder (DADF-AA1/-AB1) is optional for the imageRUNNER 2545/2535/2530/2525/2520.
Be careful not to drop objects such as paper clips into the gaps, as they may damage the machine or cause it to break down.
Do not place any objects in the original output area. Blocking the original output area may damage the originals fed through the feeder, or cause paper jams.
|
|
Feeder (DADF-AA1)
(for the imageRUNNER 2545/2535) |
|
Feeder (DADF-AB1)
(for the imageRUNNER 2530/2525/2520) |
 |
||
Feeder Cover
Open this cover to remove jammed originals.
Slide Guides
Adjust the slide guides to match the width of the originals.
Original Supply Tray
Originals placed here are automatically fed sheet by sheet to the scanning area. Place originals into this tray with the side that you want to scan face up.
Original Output Area
Originals that have been scanned from the original supply tray are output to the original output area in the order that they are fed into the feeder.
Original Set Indicator
This indicator lights up when originals are placed on the original supply tray.
Optional Accessory
Stamp Unit-B1
With the Stamp Unit-B1 attached to the feeder, originals scanned through the feeder can be stamped to indicate that they have already been scanned. (Specifying the Scan Settings)
ADF Access Handle-A1
This handle assists you to close the feeder.
ADF Access Handle-A1
Use this handle when you close the feeder.