IMPORTANT
|
The Booklet mode cannot be used with the Automatic Paper Selection, 2-Sided Copying, Finishing, 2-Page Separation, Frame Erase, Different Size Originals, or ID Card Copy modes.
Make sure that the paper type setting is correct. An incorrect paper type setting may adversely affect the image quality, damage the fixing unit, and cause paper jams.
Make sure to place originals with a vertical (portrait) orientation vertically. If these originals are placed horizontally, the even numbered pages will be printed upside down.
|
NOTE
|
Paper used for the Booklet mode must conform to the following specifications:
Paper size: A4R, A3, or B4
Paper type: Plain, Recycled, Color
|
1
|
Press [2-Sided Original].
NOTE:
[2-Sided Original] is available only when the machine is equipped with the feeder (optional for the imageRUNNER 2545/2535/2530/2525/2520).
|
2
|
Select the type of two-sided original → press [OK].
[Book Type]: The front and back sides of the original have the same top-to-bottom orientation.
[Calendar Type]: The front and back sides of the original have opposite top-to-bottom orientations.
|
3
|
Press [Next].
|
1
|
Press [Add Cover] → [Next].
|
2
|
Press [On] → [Next].
|
3
|
Select the paper source to use for the cover page → press [OK] → [Done].
IMPORTANT:
You must select the same paper size for the cover page as that used for the content pages.
NOTE:
If you select the paper in the paper drawer, you must load the paper face up.
If you select the paper in the stack bypass, you must load the paper face down.
|