IMPORTANT
|
Changes made to LPD Settings, RAW Settings, and WSD Print Settings become effective when the machine is restarted. To restart the machine, turn it OFF, wait at least 10 seconds, and then turn it ON. For instructions on how to turn the machine ON and OFF, see Chapter 2, “Before You Start Using the Machine,” in the User’s Guide.
|
NOTE
|
The default settings are as follows:
LPD Settings: On
RAW Settings: On
WSD Print Settings: Off
|
1
|
Press [On] for <Use RAW>.
|
2
|
If you want to establish bidirectional communication using Port 9100, press [On] for <Use Bidirectional>.
|
3
|
Press [OK].
|
1
|
Press [Off] for <Use RAW>.
|
2
|
Press [OK].
|
1
|
Press [On] for <Use WSD>.
|
2
|
If you want to use the multicast discovery function, press [On] for <Use Multicast Discovery>. Otherwise, press [Off].
|
3
|
Press [OK].
|
1
|
Press [Off] for <Use WSD>.
|
2
|
If you want to use WSD browsing, press [On] for <Use WSD Browsing>. Otherwise, press [Off].
|
3
|
If you want to use the multicast discovery function, press [On] for <Use Multicast Discovery>. Otherwise, press [Off].
|
4
|
Press [OK].
|