Optional Equipment

1.

If the Booklet Trimmer-D1 is attached to the Booklet Finisher-Q1 PRO, the fore edge of saddle stitched copies can be trimmed for neat output. For more information on the Booklet Trimmer-D1, see the instruction manual of the Booklet Trimmer-D1.

2.

The Staple-P1 can be attached to the Booklet Finisher-Q1 PRO for saddle stitching.

3.

The Booklet Finisher-Q1 PRO is equipped with the following features: Collate, Group, Staple (Corner, Double, Saddle Stitch), and Saddle Fold.

4.

If the Paper Folding Unit-H1 is attached to the Staple Finisher-Q1 PRO or Staple Finisher-Q1 PRO, the paper can be folded in 5 different ways (Z-Fold, Half Fold, C-Fold, Accordion Z-Fold, Double Parallel Fold).

5.

The Professional Puncher Integration Unit-B1 reverses the paper punched by the Professional Puncher-C1 to prevent a paper jam.

6.

The Professional Puncher-C1 punches several types of holes. For more information on the Professional Puncher-C1, see the instruction manual of the Professional Puncher-C1.

7.

If the Document Insertion Unit-K1 is attached, a different type of paper from the body of the document can be inserted for a cover or insert.

8.

You can scan documents such as books, thick originals, thin originals, and transparencies on the platen glass of the Duplex Color Image Reader Unit-G1. A single original can be sent from documents gathered in the feeder attached to the Duplex Color Image Reader Unit-G1.

9.

If the POD Deck Lite-A1 is attached, it can provide an additional paper source. The POD Deck Lite-A1 holds up to 3,500 sheets of paper (80 g/m2).

10.

The Copy Card Reader-F1 enables Department ID Management to be performed through the use of cards.

11.

The Utility Tray-A2 provides space for placing originals.

12.

If the Paper Deck Unit-C1 is attached, it can provide an additional paper source. The Paper Deck Unit-C1 holds up to 3,500 sheets of paper (80 g/m2).

13.

Instead of the Duplex Color Image Reader Unit-G1, you can attach the Printer Cover-B1.

14.

The Puncher Unit-BT1 is equipped with the Hole Punch mode. The Puncher Unit-BT1 can be attached only if the Staple Finisher-Q1 PRO or Booklet Finisher-Q1 PRO is attached.

15.

The Staple-N1 can be attached to the Staple Finisher-Q1 PRO or Booklet Finisher-Q1 PRO for stapling (Corner/Double).

16.

The Staple Finisher-Q1 PRO is equipped with the following features: Collate, Group, Offset, and Staple (Corner and Double).

17.

The Tab Feeding Attachment Kit-B1 can only be attached to Paper Drawer 3 or 4, and holds only tab papers.

1.

If the Inner Booklet Trimmer-A1 is attached to the Booklet Finisher-N1, the Trim mode can be used to trim the edges of the booklet.

2.

The Staple-P1 can be attached to the Booklet Finisher-N1 for saddle stitching.

3.

The Booklet Finisher-N1 is equipped with the following features: Collate, Group, Offset, Staple (Corner/Double/Saddle Stitch), and Saddle Fold.

4.

If the Paper Folding Unit-H1 is attached to the Staple Finisher-N1 or Booklet Finisher-N1, the paper can be folded in 5 different ways (Z-Fold, Half Fold, C-Fold, Accordion Z-Fold, Double Parallel Fold).

5.

The Professional Puncher Integration Unit-B1 reverses the paper punched by the Professional Puncher-C1 to prevent a paper jam.

6.

The Professional Puncher-C1 punches several types of holes. For more information on the Professional Puncher-C1, see the instruction manual of the Professional Puncher-C1.

7.

If the Document Insertion Unit-K1 is attached, a different type of paper from the body of the document can be inserted for a cover or insert.

8.

You can scan documents such as books, thick originals, thin originals, and transparencies on the platen glass of the Duplex Color Image Reader Unit-G1. A single original can be sent from documents gathered in the feeder attached to the Duplex Color Image Reader Unit-G1.

9.

If the POD Deck Lite-A1 is attached, it can provide an additional paper source. The POD Deck Lite-A1 holds up to 3,500 sheets of paper (80 g/m2).

10.

The Copy Card Reader-F1 enables Department ID Management to be performed through the use of cards.

11.

The Utility Tray-A2 provides space for placing originals.

12.

If the Paper Deck Unit-C1 is attached, it can provide an additional paper source. The Paper Deck Unit-C1 holds up to 3,500 sheets of paper (80 g/m2).

13.

Instead of the Duplex Color Image Reader Unit-G1, you can attach the Printer Cover-B1.

14.

The Puncher Unit-BF1 or Puncher Unit-BG1 is equipped with the Hole Punch mode. The Puncher Unit-BF1 or Puncher Unit-BG1 can be attached only if the Staple Finisher-N1 or Booklet Finisher-N1 is attached.

15.

The Staple-N1 can be attached to the Staple Finisher-N1 or Booklet Finisher-N1 for stapling (Corner/Double).

16.

The Staple Finisher-N1 is equipped with the following features: Collate, Group, Offset, and Staple (Corner/Double).

17.

The Tab Feeding Attachment Kit-B1 can only be attached to Paper Drawer 3 or 4, and holds only tab papers.