Using CA-issued Key Pairs and Digital Certificates
Key pairs and digital certificates can be obtained from a certification authority (CA) for use with the machine. After obtaining them from a CA, you can install and register key pairs and CA certificate files on the machine by using the Remote UI. Make sure that the key pair and the certificate satisfy the requirements of the machine (Key and Certificate Operating Requirements). Up to 5 key pairs (including the preinstalled ones) can be registered, and up to 67 CA certificates (including the 62 preinstalled ones) can be registered.
1
Start the Remote UI and log on in System Manager Mode. Starting the Remote UI
2
Click [Settings/Registration].
3
Click [Security Settings] 
Click [Key and Certificate Settings] or [CA Certificate Settings].
Click [Key and Certificate Settings] or [CA Certificate Settings].Click [Key and Certificate Settings] to install a key pair, or [CA Certificate Settings] to install a CA certificate.
4
Click [Register Key and Certificate] or [Register CA Certificate].
To delete a registered key pair or CA certificate
On the right of the key pair or CA certificate you want to delete, click [Delete] [OK]. You cannot delete the preinstalled CA certificates.
[OK]. You cannot delete the preinstalled CA certificates.A key pair cannot be deleted if it is currently used for some purpose, such as when [TLS] or [IEEE 802.1X] is displayed under [Key Usage]. In this case, disable the function or replace the key pair before deleting it. The preinstalled CA certificates cannot be deleted.
Disabling or enabling the preinstalled CA certificates
Click [Disable] on the right of the preinstalled CA certificate you want to disable. To enable the certificate again, click [Enable] on the right of the certificate.
5
Click [Install].
You can only install one file on this machine. If another file is already installed, click [Delete] [OK] to delete the previously installed file.
[OK] to delete the previously installed file. 
6
Click [Browse], specify the file to install, and click [Start Installation].
 | The key pair or CA certificate from the computer is installed in the machine.  |
7
Register the key pair or CA certificate.
Registering a key pair
1 | Click [Register] on the right of the key pair you want to register.  |
2 | Enter the name of the key pair and password, and then click [OK].  [Key Name] Enter a name of up to 24 alphanumeric characters for registering the key pair in the machine. Set a name that will be easy for you to find later in a list. [Password] Enter up to 24 alphanumeric characters for the password of the secret key that is set in the file to be registered. |
Registering a CA certificate
Click [Register] on the right of the CA certificate you want to register.
