Replacing Toner Cartridges
Before replacing toner cartridges, see "Attention (Toner Cartridge)." |
1
Open the front cover.
2
Pull out the toner cartridge to be replaced.
(1) Hold the handle.
(2) Pull out the toner cartridge.
(2) Pull out the toner cartridge.
 |  |  |
3
Take out the new toner cartridge from the protective bag.
You can open the protective bag with your hands from the notch.
 | Keep the protective bag. Do not discard it. You will need it when you remove the toner cartridge for printer maintenance or other purposes. |
4
Shake the toner cartridge five or six times as shown in the figure to evenly distribute the toner inside the cartridge.
Do not remove the drum protective cover (A).
5
Holding the tab (A), remove the drum protective cover.
| Keep the removed drum protective cover. You will need it when you remove the toner cartridge for printer maintenance or other purposes. |
6
Install the toner cartridge.
Fit the projection (A) of the toner cartridge into the guide (B) on the printer unit to install the toner cartridge.
| When installing a toner cartridge, take care that the drum does not hit the side of the printer. |
Push it into the printer firmly.
IMPORTANT |
Precautions when installing toner cartridgesThe position of the toner cartridges in the printer is determined by the toner color. Install the toner cartridges in the slots that have labels of the same color.  |
7
Close the front cover.
 If you cannot close the front coverMake sure that the toner cartridges are installed in the printer properly. Do not try to forcefully close the front cover, as this may damage the printer. |