Installing the System Options/MEAP Applications
The procedures to install the system options or MEAP applications on the printer differ, depending on whether the printer is connected or not to an outside network. Select the procedure that matches your conditions using the references below.
Installing by Connecting this Printer to an Outside Network
Install from the Remote UI.
NOTE |
Communication testTo check that the transmission with the delivery server is properly operating, if necessary, perform a communication test before installation. |
Installing by Not Connecting this Printer to an Outside Network
Installing System Options
Install using one of the following procedures.
NOTE |
If you install multiple system optionsWe recommend that you install from the Remote UI. |
Procedure | Necessary Steps | Reference Page |
Using the Remote UI to install | 1. | Obtain the license file from the License Management System |
| |
2. | Install the license file using the Remote UI |
| |
Installing MEAP Applications
Use the following procedure to install.
Procedure | Necessary Steps | Reference Page |
Using the Remote UI to install | 1. | Obtain the license file from the License Management System |
| |
2. | Install the license file and application file using the Remote UI |
| |
3. | Start the MEAP applications from SMS |
| |