Performing the Configuration Using the Printer's Control Panel (the Settings to Be Performed First)
When configuring the spooler function using the printer's control panel, use the following menu hierarchy.
| Pressing [ ![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_KET050_L.gif) ] ( ![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_C211.gif) Settings) displays the common Setup menu. ![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_CTB061.gif) indicates that the procedure is performed by pressing [ ![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_key_up.gif) ] or [ ![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_key_down.gif) ] on the control panel. ![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_CTB060.gif) indicates that the procedure is performed by pressing [OK] on the control panel. |
IMPORTANT |
After performing the configurationTo enable the settings, perform a hard reset or restart the printer. For details on a hard reset, see " Canceling All the Jobs (Hard Reset)." To go back up the hierarchy Press [ ![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_ZSK212.gif) ] ( ![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_KET_panel002.gif) Back). About the control panelFor details on the control panel, see " Control Panel." |
1
Press [
![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_KET050_L.gif)
] (
![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_C211.gif)
Settings), select [Network] using [
![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_key_up.gif)
] and [
![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_key_down.gif)
], and then press [OK].
When the message is displayed, press [OK].
| You can specify the settings when the printer is either online (the ![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_C201.gif) Online indicator is on) or offline (the ![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_C201.gif) Online indicator is off). |
2
Select [Spooler] using [
![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_key_up.gif)
] and [
![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_key_down.gif)
], and then press [OK].
3
Specify the setting for the spooler function using [
![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_key_up.gif)
] and [
![](./images/book_images/pubnumbers/USRMA-0668-zz-SS-enUV/b_key_down.gif)
], and then press [OK].
4
Perform a hard reset or restart the printer.
After performing a hard reset or restarting the printer, the settings are effective.
NOTE |
For details on a hard reset |