Staple Finisher-T1/Booklet Finisher-T1
This section describes how to clear a staple jam which occurs in the stapler unit of the Staple Finisher-T1/Booklet Finisher-T1. The location of the Staple Finisher-T1/Booklet Finisher-T1 is indicated in the following illustration.
IMPORTANT |
Make sure to close all covers and paper drawers of the machine before clearing any staple jams. |
NOTE |
The Staple Finisher-T1 and Booklet Finisher-T1 are optional products.* * imagePRESS C750, imagePRESS C650, imagePRESS C65 |
1.
Open the front cover of the finisher.
*1 Booklet Finisher-T1
*2 Staple Finisher-T1
2.
Lift and pull out the staple case from the stapler unit, holding it by the green tab.
3.
Remove any staples jammed in the staple case.
 | 1. Push down the tab on the staple case. |
2. Remove all of the staples that slide from the staple cartridge. | |
3. Return the tab on the staple case to its original position. |
 CAUTION |
Be careful with the staple waste as this may result in personal injury. |
4.
Gently push the staple case back into the finisher and push down firmly until it is securely in place.
5.
Close the front cover of the finisher.
| CAUTION |
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury. |
NOTE |
After the cover is closed, the stapler unit may automatically perform a "dry" stapling operation to reposition the staples. |