Image Orientation When Output with External Finisher
You can change the output image orientation for delivering paper from the High Capacity Stacker-H1 to the external finisher.
This mode can be set if the High Capacity Stacker-H1 and the external finisher are attached. (See "High Capacity Stacker-H1.")
1.
Press 
.
.2.
Press [Function Settings] → [Common] → [Paper Output Settings].
3.
Press [Image Orient. When Output with Extrnl. Fin.].
4.
Select [Do Not Rotate] or [Rotate 180 Degrees] → press [OK].
Details of each item are shown below.
[Do Not Rotate]: | Paper is output with the top edge of the paper at the back of the tray. |
[Rotate 180 Degrees]: | Paper is output with the top edge of the paper at the front of the tray. |