Placing Documents in the Feeder
|
Before placing documents in the feeder, see "Attention (Placing Documents in the Feeder)."
|
1
Pull out the document feeder tray.
2
Spread the document guides a little wider than the document's width.
3
Fan the document stack, and align the edges of the pages.
4
Neatly place the document face down.
Place the document under the load limit guides (A).
5
Align the document guides tightly to the width of the document.
The machine is ready to copy or scan the document.
 |
Up to 30 documents can be loaded into the feeder.
|
|
IMPORTANT
|
Adjust the document guides to the paper width without space.If the document guides are loose or tight, this may result in misfeeds or paper jams.
 |
6
Place the document return tray in the machine.
7
Lift the document stopper.
