Advanced Settings for the Fax/Tel Auto Switch Mode
Set the advanced settings for the Fax/Tel Auto Switch mode.
1
Press [
] (FAX/COPY) to switch to the Fax mode screen.
] (FAX/COPY) to switch to the Fax mode screen.
2
Press [
] or [
] to highlight <RX Mode>, and then press [OK].
] or [] to highlight <RX Mode>, and then press [OK].
3
Press [] or [] to highlight <Fax/Tel Auto Switch>, and then press [OK].
] or [] to highlight <Fax/Tel Auto Switch>, and then press [OK].
4
Press [] or [] to highlight the option, and then press [OK].
] or [] to highlight the option, and then press [OK].
|
<Ring Start Time>
|
Specify how long the machine will attempt to detect a fax tone before the handset starts ringing.
Set the duration somewhere between 4 to 30 seconds and press [OK].
|
|
<Incoming Ring Time>
|
Set how long the handset will ring during an incoming call.
Set the duration somewhere between 15 to 300 seconds and press [OK].
|
|
<Action After Ring>
|
Specify how the machine behaves when an incoming call is not answered.
Select <End> or <RX> and press [OK].
<End>: Disconnect the call.
<RX>: Receive an incoming fax.
|
5
Press [] or [] to highlight <Apply>, and then press [OK].
] or [] to highlight <Apply>, and then press [OK].The changes are saved.
