Cleaning the Feeder
|
See "Attention (Cleaning the Machine)" in advance.
|
If your document has black streaks or appears dirty after it has been scanned from the feeder, the rollers inside the feeder may be dirty. Clean the feeder's scanning area and rollers.
1
Turn OFF the power switch, and then disconnect the power cord.
2
Lift the operation panel.
3
Clean the rollers (A) inside the feeder with a well wrung out cloth dampened with water and wipe them with a soft, dry cloth.
4
Lower and close the operation panel until it is locked.
 |
Push down the operation panel until it is locked.
|
5
Connect the power cord, and then turn ON the power switch.