Fax RX Settings

NOTE
Menu options in the following chart:
Default settings are highlighted in bold.
For values with "*1" mark, the default value varies depending on the country where you are using the machine.
For values with "*2" mark, the value may be vary depending on the country where you are using the machine.

RX Function Settings

Settings
Descriptions
Reduce RX Size
Set an automatic reduction rate for printing received faxes:
Off
On:
Reduction Ratio: Auto, 97, 95, 90, 75 (%)
Reduction Direction: Vertical/Horizontal, Vertical Only
"Reduce RX Size"
RX Page Footer
Set whether or not to include a footer on received faxes:
Off, On
"RX Page Footer"
Continue Print. When Toner Is Nearly Out
Set whether or not to continue printing when toner is low:
Off, On
"Continue Print. When Toner Is Nearly Out"

Fax Settings

Settings
Descriptions
ECM RX
Set whether or not to use the electronic correction mode:
Off, On
"ECM RX"
Incoming Ring
Set whether or not to ring the external telephone or the handset when <RX Mode> is set to <Auto> or <Fax/Tel Auto Switch>:
Off
On:
Ring Times: 1 to 2 to 99*2 (times)
"Incoming Ring"
Remote RX
Set whether or not to use the "remote receiving function" enabling you to receive fax documents by dialing an ID number even in the middle of a telephone call:
Off
On*1:
Remote RX ID: 00 to 25 to 99
"Remote RX"
Auto RX Switch
Set the incoming call ring time before the machine switches to the fax mode automatically. This option can be enabled when the <RX Mode> is set to <Manual>:
Off
On:
Incoming Ring Time: 1 to 15 to 99 (seconds)
"Auto RX Switch"
 
05J0-08H