Loading Registered Data from a USB Memory Device
Load (import) data that was exported from the machine to a USB memory device. You can also import settings from another machine if it is the same model as your machine.
1
Connect a USB memory device to the USB port for a USB device.
Do not remove, bump or jostle the USB memory device while data is being imported or exported.
2
Press 
.
.3
Use 
/
to select <System Management Settings>, and press 
.
/ to select <System Management Settings>, and press .If the logon screen appears, enter the correct ID and PIN using the numeric keys, and then press 
. Logging on to the Machine
. Logging on to the Machine4
Select <Import/Export of Settings> 
<Import>.
<Import>.5
Check the message, select <Yes>, and press .
.
6
Enter the password, select <Apply>, and press .
.Enter the password that was set when exporting the data.
Importing starts. The machine automatically restarts after the import is complete.
7
Disconnect the USB memory device from the USB port.
|
1
|
Press
 . |
|
2
|
Select <Device Status>, and press
. |
|
3
|
Select <Remove Memory Media>, and press
.Wait until the <Memory media can be safely removed.> message is displayed.
|
|
4
|
Disconnect the USB memory device.
|