Printing from USB Memory (USB Print)

You can print image files stored in a USB memory device by connecting it directly to the machine. Using this function, you can print without using a computer.

Available File Formats

You can print the following types of files.

JPEG (DCF/Exif 2.21 or earlier/JFIF)

TIFF (JPEG/MH/MR/MMR compression)

PDF


For JPEG and TIFF files, maximum printable data size per file* is 10 MB. * For multi-page TIFF files, maximum data size is per page. For PDF files, maximum printable data size per file is 2 GB. Note that even some files smaller than the size described above may not be printed correctly.

Available USB Memory Devices

You can use USB memory devices with the following format styles.

FAT16 (memory capacity: up to 2 GB)

FAT32 (memory capacity: up to 32 GB)


Do not use non-standard USB memory devices. You may not be able to print the images properly in some USB memory devices. Do not connect anything other than a USB memory device. USB memory devices cannot be connected via a USB hub or an extension cable. Do not use USB memory devices with special functions such as built-in security functions.


The USB port of the machine supports USB 2.0. If a folder in a USB memory device has many files, scanning image files to print will take more time. Use your computer to delete unnecessary files on your USB memory device or move them to a different folder.

Connect a USB memory device to the USB memory port on the lateral side of the operation panel.

Do not remove the USB memory device or shock or shake the device or the machine when data is being read. Also, do not turn OFF the machine while the processing is in progress.

Press

and tap <Memory Media Print>.

Tap <Select File and Print>.

Index Print

You can print thumbnails of the image files (JPEG only) stored in a USB memory device. To print the images in thumbnails, select <Index Print> on the screen, and proceed to the next step.

Select the file to print.

You can select multiple files.

To clear a selection, tap the file you have selected (marked as

To display the contents of a folder, select a folder, and tap. To return to the folder in the upper level, press

Folders and files lower than the third directory are not displayed.

When you move to another folder, the previous file selections will be cleared.

To select all files

1	Tap <All Items>.
2	Tap <Select All>. To clear all selections, tap <Clear All>.
3	Tap <JPEG/TIFF> or <PDF>. If you selected a file before you tap <All Items>, you can only select files of the same format.

To display previews

You can change the display method from <Details> (for file names and modification dates) to <Images> (for previews). By previewing images, you can check the file content before you select a file to print.

Preview images are not displayed for PDF files.

You can specify either <Details> or <Images> as the default display method. Default Display Settings

Tap <All Items>.

Tap <Display Method>.

Tap the display method.

Displays file names and dates.

You can set whether to display abbreviated file names.File Name Display Format

Displays previews.

Tap

or flick to switch the preview.

Tap

to display a larger preview. Tap

to return to the original preview size.

To change the file sort order

You can change the sort order of the files in a USB memory device.

You can specify a sort setting such as <Name (Ascending)> or <Date/Time (Ascending)> as the default setting for the file sort order. File Sort Default Settings

1	Tap <All Items>.
2	Tap <Sort Files>.
3	Tap the criteria for file sorting.
	When you select <Date/Time (Ascending)> or <Date/Time (Descending)>, files are sorted based on the modification dates and time of the files.

Tap <Apply>.

Specify the print settings as necessary.

Tap the item you want to set.

<Number of Copies>

Specify the number of copies from 1 to 99. Tap

or the numeric keys to enter a quantity, and tap <Apply>.

<Paper>

Select the paper to print on.

<N on 1>

You can print two or four images onto a single sheet. Select <2 on 1> or <4 on 1>. <N on 1> is not available for printing TIFF files.

<2 on 1>

Prints two images onto a single sheet.

<4 on 1>

Prints four images onto a single sheet.

<2-Sided>

You can make 2-sided printouts. Select the binding position.

<Book Type>

Prints images in such a way that the printed pages are opened horizontally when bound.

<Calendar Type>

Prints images in such a way that the printed pages are opened vertically when bound.

<2-Sided> may not be available with some sizes or types of paper. Paper

<Print Quality>

You can change settings related to print quality.

Adjust the toner density to be used for printing. Make adjustment using

, and then tap <Apply>. Note that if <Toner Save> is set to <On>, you cannot set this item.

Making fine adjustment of toner density
When you want to make fine adjustments of toner density on three density levels - high, medium, and low -, use the following procedure.
<Fine Adjust>

Select the density level

Adjust the density

<Apply>

Tapping <On> prints in toner saving mode. Select <On> when you want to check the layout or other appearance characteristics before proceeding to final printing of a large job.

<Set JPEG/TIFF Details>

Specify the default settings of the USB Print function for JPEG and TIFF files.

If you tap <On>, you can print the modification date of the file below each image.

Although <Print Date>is not available for Index Print, the modification date of the file is automatically printed below each image.

<Print Date> is not available for printing PDF files.

If you tap <On>, you can print the file name below eachimage.

Although <Print File Name> is not available for Index Print, the file name is automatically printed below each image.

<Print File Name> is not available for printing PDF files.

You can select the type of original depending on the image to print. Select <Photo Priority> or <Text Priority>.

<Photo Priority>

Gives priority to printing photo images smoothly.

<Text Priority>

Gives priority to printing text clearly.

<Original Type> is not available for printing PDF files.

You can adjust the brightness of printouts. Tap

to adjust the brightness, and tap <Apply>.

<->

Prints images darker.

<+>

Prints images brighter.

You can adjust the brightness of TIFF files only when they are JPEG-compressed.

You can select the printing method to reproduce halftones (the intermediate range between the lighter and darker areas of an image) for optimal image quality. Tap <Gradation> or <Error Diffusion>.

<Gradation>

Prints images with fine gradation, such as digital camera images, with a smooth finish.

<Error Diffusion>

Prints images with small text or fine lines with a clear finish.

You can select ways to convert color values to a grayscale value when you print color print data.

<sRGB>

Color data is converted to monochrome with emphasis on color differences so that a smooth gradation is achieved.

<NTSC>

Color data is converted to monochrome so that the resulting image looks like a television picture (of the NTSC system).

<Uniform RGB>

Color data is converted to monochrome so that R, G, and B are uniformly converted to the same gray level.

<Set PDF Details>

You can change the print settings for PDF files.

This setting enlarges or reduces the original document to match the printable area of the paper size.

This setting specifies whether to enlarge the printable area on the paper.

<Off>

The area 5 mm from the top, bottom, left and right edges of the paper is not printable.

<On>

The printable area is enlarged to the top, bottom, left, and right edges of the paper.

If you select <On>, images on the edge of the paper may not print properly.

This setting specifies whether to print annotations in the PDF file.

<Off>

Prints no comments.

<Auto>

Prints only those comments that are specified to be printed in the PDF file.

You can print password protected PDF files by entering the password required to open them.

<Other>

You can select the printing method to reproduce halftones (the intermediate range between the lighter and darker areas of an image) for optimal image quality. For each document, you can make settings by type of image.

Type of image

Select the object for which to change the setting. <Text> represents letters and characters, <Graphics> represents lines and figures, and <Image> represents photos and images.

Produces a fine print with clear edges of text. It is suitable for printing characters and fine lines.

Produces a print with smooth gradation or smooth edges. It is suitable for printing figures or graphs containing gradation areas.

As compared to <Resolution>, this produces a finer print but quality stability is slightly lower. It is suitable to obtain a print of character data or fine line data or CAD data with sharp edges.

You can select ways to convert color values to a grayscale value when you print color print data.

<sRGB>

Color data is converted to monochrome with emphasis on color differences so that a smooth gradation is achieved.

<NTSC>

Color data is converted to monochrome so that the resulting image looks like a television picture (of the NTSC system).

Color data is converted to monochrome so that R, G, and B are uniformly converted to the same gray level.

Tap <Start Printing>.

Printing starts.

If you want to cancel printing, tap <Cancel>

<Yes>

Disconnect the USB memory device from the USB port.

1	Press .
2	Press .
3	Tap <Device Status>.
4	Tap <Remove Memory Media>. Wait until the message <The memory media can be safely removed.> is displayed.
5	Disconnect the USB memory device.


If you always want to print with the same settings: Changing Default USB Print Settings

Memory Media Print Settings