2-Sided Copying

You can copy two pages of a document on both sides of the paper. You can also copy a two-sided document on both sides of the paper, or on two separate pages.


Make sure that the paper size switch lever is set properly When performing 2-sided copying, improper setting of the paper size switch lever can cause misfeeds or paper jams. When performing 2-sided copying, make sure that the paper size switch lever is set properly for the size of the paper to be used. Interior Make sure that the sub-output tray is closed When the sub-output tray is open, you cannot perform 2-sided copying. When performing 2-sided copying, always make sure that the sub-output tray is closed. Back Side

Make sure that the paper size switch lever is set properly

When performing 2-sided copying, improper setting of the paper size switch lever can cause misfeeds or paper jams. When performing 2-sided copying, make sure that the paper size switch lever is set properly for the size of the paper to be used. Interior

Make sure that the sub-output tray is closed

When the sub-output tray is open, you cannot perform 2-sided copying. When performing 2-sided copying, always make sure that the sub-output tray is closed. Back Side


<2-Sided> may not be available with some sizes and types of paper. Paper <2-Sided> is not available when using <ID Card Copy>.

<Copy>

<2-Sided>

Select the type of 2-sided copying

Types of 2-sided copying

The illustration below shows the types of 2-sided copying.

1-Sided->2-Sided	2-Sided->2-Sided	2-Sided->1-Sided

<Original/Finishing Type>

Specify if you want to change the binding, such as when copying book-type documents in calendar-type format.

1-Sided->2-Sided

If you want to copy portrait-oriented documents in calendar-type format (short-edge binding)

<1-Sided->2-Sided>

If you want to copy landscape-oriented documents in book-type format (short-edge binding)

<1-Sided->2-Sided>

2-Sided->2-Sided

If you want to create copies with a different binding type than the original

<2-Sided->2-Sided>

Select the original orientation

Select the original binding type

Select the binding type for the finished copy, which is different from that of the original document

2-Sided->1-Sided

This setting enables you to align the direction of the output paper.

When a 2-sided document is in portrait-oriented calendar-type format (short-edge binding)

<2-Sided->1-Sided>

When a 2-sided document is in landscape-oriented book-type format (short-edge binding)

<2-Sided->1-Sided>

Basic Copy Operations

Copying Multiple Documents onto One Sheet (2 on 1/4 on 1)