Setting a Remote UI PIN

You can set a PIN for access to the Remote UI. All users use a common PIN.
When Department ID Management is enabled, setting here is not required. Setting the Department ID Management
1
Start the Remote UI and log on in System Manager Mode. Starting Remote UI
2
Click [Settings/Registration].
3
Tap [Security Settings]  [Remote UI Settings].
4
Click [Edit].
5
Select the [Use Remote UI Access PIN] check box and set the PIN.
[Use Remote UI Access PIN]
If you select the check box, you must enter a PIN to access the Remote UI.
[Set/Change PIN]
To set a PIN, select the check box and enter a number of up to seven digits both in the [PIN] and [Confirm] text boxes.
6
Click [OK].
Using the operation panel
Remote UI Access PIN settings can also be accessed from <Menu> in the Home screen. Remote UI Settings
If Remote UI settings are initialized
The Remote UI Access PIN is also initialized. After an initialization, reset the PIN. Initializing Menu
Setting Access Privileges
Setting the System Manager ID
0XX3-08W