Entering Sleep Mode
The sleep mode function reduces the amount of power consumed by the machine by disabling power flow to the control panel. If no operations will be performed on the machine for a while, such as during a lunch break, you can save power simply by pressing 
on the control panel. You can also use the Auto Sleep Time setting to automatically put the machine into sleep mode if it remains idle for a specified length of time.
on the control panel. You can also use the Auto Sleep Time setting to automatically put the machine into sleep mode if it remains idle for a specified length of time. 
|
|
When in sleep modeWhen the machine enters sleep mode,
lights up green.Situations in which the machine does not enter sleep modeWhen the machine is in operation
When the [Processing/Data] indicator is lit up or blinking
When the machine is performing an operation such as adjustment or cleaning
When a paper jam occurs
When the menu screen is displayed
When a job is waiting to be scanned to a computer
When an error message is displayed on the screen (There are some exceptions. The machine sometimes enters sleep mode when error messages are displayed.)
|
When You Want to Set the Auto Sleep Timer
The factory default settings for the amount of time that elapses before the machine enters auto sleep mode are listed below. We recommend using the factory default settings to save the most power. If you want to change the amount of time that elapses before the machine enters auto sleep mode, follow the procedure below.
10 minutes (setting range is 3 to 60 minutes)
<Menu> 
<Timer Settings> <Auto Sleep Time> Set the amount of time that elapses before the machine automatically enters sleep mode <Apply>
<Timer Settings> <Auto Sleep Time> Set the amount of time that elapses before the machine automatically enters sleep mode <Apply>
Exiting Sleep Mode
Press . You can also tap the display or press any key other than to exit sleep mode.
. You can also tap the display or press any key other than to exit sleep mode.