<Printer>

This section describes the printer settings.

<Output Report>

(Settings/Registration)

You can print reports for the machine settings.

<Printer Settings>

(Settings/Registration)

Specify the printer settings.

For more information, see Setting the Machine (PS/PCL/UFR II Printer).

<Restrict Printer Jobs>

(Settings/Registration)

If this setting is set to <On>, you can restrict jobs from the printer driver.

<PDL Selection (Plug and Play)>

(Settings/Registration)

Select default Page Description Language (PDL).

<Prioritize Printer Driver Settings for Jobs with MP Tray>

(Settings/Registration)

You can prioritize printer driver settings over the paper settings in the machine when printing a job with the multi-purpose tray specified as the paper source.


When the following conditions are met, you can press <Temp. Change Ppr. in MP Tray> on the paper selection screen of <Copy> and <Access Stored Files> to change the paper size/type to load from the multi-purpose tray: If paper is loaded in the multi-purpose tray If this setting is set to <On> If <Multi-Purpose Tray Defaults> is set to <Use Preset> If the paper size specified in the printer driver greatly differs from the paper size set in the multi-purpose tray, an error message is displayed.

When the following conditions are met, you can press <Temp. Change Ppr. in MP Tray> on the paper selection screen of <Copy> and <Access Stored Files> to change the paper size/type to load from the multi-purpose tray:

If paper is loaded in the multi-purpose tray

If this setting is set to <On>

If <Multi-Purpose Tray Defaults> is set to <Use Preset>

If the paper size specified in the printer driver greatly differs from the paper size set in the multi-purpose tray, an error message is displayed.

<PS Password Settings>

(Settings/Registration)

You can specify the password that restricts the use of the control command prepared by the PS printer.


<SystemParamsPassword> is a password that allows changes to the system parameter, and <StartJobPassword> is a password that allows startjob, exitserver operator to perform. For more information, check PostScript language specifications.

<Paper Feed Mode When Using PCL Emulation>

(Settings/Registration)

You can set the paper source used for the PCL5 PaperSource command.


For details on each setting, see Setting the Machine (PS/PCL/UFR II Printer).