<Preferences> <External Interface> <USB Settings><External Interface>
This section describes the USB settings.
<Use as USB Device>
<Preferences> <External Interface> <USB Settings>You can set whether to use the machine as a USB device.
 |
|
If this is set to <Off>, print and scan jobs from a computer connected via USB cable cannot be performed.
Changes in settings are effective after performing <Apply Setting Changes> on the Top screen of the Settings/Registration.
|
<Use MEAP Driver for USB Input Device>
<Preferences> <External Interface> <USB Settings>You can set whether to use the MEAP driver for USB input device connections.
 |
|
Depending on the type of MEAP application that uses device such as a keyboard or card reader, you may need to set this to <On>. To check whether you need to set this to <On>, see the manual for the MEAP application you are using, or contact your local authorized Canon dealer.
|
|
|
|
Changes in settings are effective after performing <Apply Setting Changes> on the Top screen of the Settings/Registration.
|
<Use MEAP Driver for USB Storage Device>
<Preferences> <External Interface> <USB Settings>You can set whether to use the MEAP driver for USB external storage.
|
|
|
Depending on the type of MEAP application that uses USB external memory device, you may need to set this to <On>. To check whether you need to set this to <On>, see the manual for the MEAP application you are using, or contact your local authorized Canon dealer.
|
|
|
|
Changes in settings are effective after performing <Apply Setting Changes> on the Top screen of the Settings/Registration.
|
<Use USB Storage Device>
<Preferences> <External Interface> <USB Settings>You can set whether to allow the use of USB external storage devices.
|
|
|
Changes in settings are effective after performing <Apply Setting Changes> on the Top screen of the Settings/Registration.
|