Network

<Output Report>

<Yes>, <No>

<Confirm Network Connection Setting Changes>

<On>, <Off>

<Use IPv4>

<On>, <Off>

<IP Address Settings>

<IP Address>: <0.0.0.0>

<Subnet Mask>: <0.0.0.0>

<Gateway Address>: <0.0.0.0>

<DHCP>: <On>, <Off>

<Auto IP>: <On>, <Off>

<DHCP Option Settings>

<Acquire Host Name>: <On>, <Off>

<DNS Dynamic Update>: <On>, <Off>

<Acquire DNS Server Address>: <On>, <Off>

<Acquire Domain Name>: <On>, <Off>

<Acquire WINS Server Address>: <On>, <Off>

<Acquire SMTP Server Address>: <On>, <Off>

<Acquire POP Server Address>: <On>, <Off>

<Release Address Last Acquired from DHCP Server When Address Cannot Be Acquired>*1: <On>, <Off>

<PING Command>

<IPv4 Address>: <0.0.0.0>

<Use IPv6>

<On>, <Off>

<Stateless Address Settings>

<Use Stateless Address>: <On>, <Off>

<Manual Address Settings>

<Use Manual Address>: <On>, <Off>

<Manual Address> (IPv6 Address (39 characters maximum))

<Prefix Length>: 0 to 64 to 128

<Default Router Address> (39 characters maximum)

<Use DHCPv6>

<On>, <Off>

<PING Command>

<IPv6 Address> (39 characters maximum)

<Host Name>

<Only Retrieve Stateful Address Prefix>

<On>, <Off>

<DHCP Option Settings>

<Acquire DNS Server Address>: <On>, <Off>

<Acquire Domain Name>: <On>, <Off>

<DNS Server Address Settings>

<Primary DNS Server>

<Secondary DNS Server>

<Primary DNS Server>

<Secondary DNS Server>

<DNS Host/Domain Name Settings>

<Host Name>: Canon****** ("******" represents the last six digits of a MAC address.)

<Domain Name>

<Use Same Host Name/Domain Name as IPv4>: <On>, <Off>

<Host Name>: Canon****** ("******" represents the last six digits of a MAC address.)

<Domain Name>

<DNS Dynamic Update Settings>

<IPv4>

<DNS Dynamic Update>: <On>, <Off>

<IPv6>

<DNS Dynamic Update>: <On>, <Off>

<Register Stateless Address>: <On>, <Off>

<Register Manual Address>: <On>, <Off>

<Register Stateful Address>: <On>, <Off>

<mDNS Settings>

<Use IPv4 mDNS>: <On>, <Off>

<mDNS Name> (63 characters maximum)

<Use IPv6 mDNS>: <On>, <Off>

<Use Same mDNS Name as IPv4>: <On>, <Off>

<mDNS Name> (63 characters maximum)

<Computer Name/Workgroup Name Settings>

<Computer Name> (15 characters maximum): Canon****** ("******" represents the last six digits of a MAC address.)

<Workgroup Name> (15 characters maximum): WORKGROUP

<Comment> (48 characters maximum)

<SMB Server Settings>

<Use SMB Server>: <On>, <Off>

<Use SMB Authentication>: <On>, <Off>

<Authentication Type>: <NTLMv1>, <NTLMv2>

<Require SMB Signature for Connection>: <On>, <Off>

<Require Encryption for Connection>: <On>, <Off>

<Specify SMB Server Version>

<1.0>: <On>, <Off>

<2.0>: <On>, <Off>

<3.0>: <On>, <Off>

<SMB Client Timeout>

3 to 10 to 300 sec.

<SMB Client Authentication Type>

<NTLMv1>, <NTLMv2>

<Specify SMB Client Version>

<1.0>: <On>, <Off>

<2.0>: <On>, <Off>

<3.0>: <On>, <Off>

<WINS Settings>

<WINS Resolution>: <On>, <Off>

<WINS Server Address> (IP Address)

<LPD Print Settings>

<On>, <Off>

<LPD Banner Page>: <On>, <Off>

<RX Timeout>: 1 to 5 to 60 (min.)

<RAW Print Settings>

<On>, <Off>

<Bidirectional Communication>: <On>, <Off>

<RX Timeout>: 1 to 5 to 60 (min.)

<SNTP Settings>

<Use SNTP>: <On>, <Off>

<Polling Interval>: 10 to 1440 to 2880 min.

<NTP Server Address> (IP Address or Host Name)

<Check NTP Server>

<FTP Print Settings>

<Use FTP Printing>: <On>, <Off>

<User Name>: guest

<Password>: 7654321

<Use UTF-8 to Display Name of FTP Print Job>

<On>, <Off>

<WSD Settings>

<Use WSD>: <On>, <Off>

<Use WSD Browsing>: <On>, <Off>

<Use WSD Scan Function>: <On>, <Off>

<Use FTP PASV Mode>

<On>, <Off>

<IPP Print Settings>

<On>, <Off>

<Allow When Using TLS>: <On>, <Off>

<Use Authentication>: <On>, <Off>

<Multicast Discovery Settings>

<Response>: <On>, <Off>

<Scope Name>

<Sleep Mode Notification Settings>*1

<Notify>: <On>, <Off>

<Port Number>: 1 to 11427 to 65535

<Number of Routers to Traverse>: 0 to 3 to 254

<Notification Interval>: 60 to 600 to 65535 sec.

<Use HTTP>

<On>, <Off>

<Use WebDAV Server>

<On>, <Off>

<TLS Settings>

<Settings That Use TLS>

<Set as Default Key>: <Yes>, <No>

<Certificate Details> (<Version>, <Serial Number>, <Signature Algorithm>, <Issued To>, <Validity Start Date>, <Validity End Date>, <Issuer>, <Public Key>, <Certificate Thumbprint>, <Issued To (Altn. Name)>, <Verify Certificate>)

<Display Use Location> (Displays what the key pair is being used for)

<Maximum Version>: <TLS 1.0>, <TLS 1.1>, <TLS 1.2>

<Minimum Version>: <TLS 1.0>, <TLS 1.1>, <TLS 1.2>

<Proxy Settings>

<Use Proxy>: <On>, <Off>

<Server Address> (IP Address or FQDN)

<Port Number>: 1 to 80 to 65535

<Use Proxy within Same Domain>: <On>, <Off>

<Use Proxy Authentication>: <On>, <Off>

<User Name> (24 characters maximum)

<Password> (24 characters maximum)

<Confirm Auth. Info. When in Auth. Management Mode>

<On>, <Off>

<Use IPSec>

<On>, <Off>

<Receive Non-Policy Packets>

<Allow>, <Reject>

<Policy On/Off>

<On>, <Off>

<Policy Name> (24 characters maximum)

<Local Address> (<All IP Addresses>, <IPv4 Address>, <IPv6 Address>, <IPv4 Manual Settings>, <IPv6 Manual Settings>)

<Remote Address>(<All IP Addresses>, <All IPv4 Addresses>, <All IPv6 Addresses>, <IPv4 Manual Settings>, <IPv6 Manual Settings>)

<Port> (<Specify by Port Number>, <Specify by Service Name>)

<IKE Mode>: <Main>, <Aggressive>

<Authentication Method>: <Pre-Shared Key Method> (<Shared Key>), <Digital Sig. Method> (<Key and Certificate>)

<Authentication/Encryption Algorithm> (<Auto>, <Manual Settings>)

<Authentication/Encryption Algorithm>: <Manual Settings>

<Validity>

<Time>: <On>, <Off>

<Validity>

<Size>: <On>, <Off>

<PFS>: <On>, <Off>

<Authentication/Encryption Algorithm>: <Auto>, <Manual Settings>

<Authentication/Encryption Algorithm>: <Manual Settings> (<ESP>, <ESP (AES-GCM)>, <AH (SHA1)>)

<ESP> Settings:

<ESP (AES-GCM)> Settings: None

<AH (SHA1)> Settings: None

<Connection Mode>:
Transport (display only)

<On>, <Off>

<Edit>

-

<Delete>

-

<Print List>

<Yes>, <No>

<TCP/IP Option Settings>*1

<Use Window Scale Option>: <On>, <Off>

<MTU Size>: 600 to 1500 bytes (600-1500)

<Use Network Link Scan>

<On>, <Off>

<Use TLS>: <On>, <Off>

<AppleTalk Settings>

<Use AppleTalk>: <On>, <Off>

<Phase>: <Phase 2> (display only)

<Service Name>: Device Name

<Zone>: *

<Print Mode>: <Both>, <Spool>, <Direct>

<Use SNMPv1>

<On>, <Off>

<Dedicated Community>: <On>, <Off>

<MIB Access Permission>: <Read/Write>, <Read Only>

<Community Name 1>: <On>, <Off>

<MIB Access Permission>: <Read/Write>, <Read Only>

<Community Name>: public

<Community Name 2>: <On>, <Off>

<MIB Access Permission>: <Read/Write>, <Read Only>

<Community Name>: public2

<Use SNMPv3>

<On>, <Off>

<Use Administrator>: <On>, <Off>

<Encryption Password>

<Use Same Password as for Authentication>: <On>, <Off>

<User On/Off>: <On>, <Off>

<Register> (<User Name>, <MIB Access Permission> (<Read/Write>, <Read Only>), <Security Settings> (<Auth. Yes/Encrypt. Yes>, <Auth. Yes/Encrypt. No>, <Auth. No/Encrypt. No>), <Authentication Algorithm> (<MD5>, <SHA1>), <Authentication Password>, <Encryption Algorithm> (<DES>, <AES>), <Encryption Password>)

<Details/Edit> (<User Name>, <MIB Access Permission> (<Read/Write>, <Read Only>), <Security Settings> (<Auth. Yes/Encrypt. Yes>, <Auth. Yes/Encrypt. No>, <Auth. No/Encrypt. No>), <Authentication Algorithm> (<MD5>, <SHA1>), <Authentication Password>, <Encryption Algorithm> (<DES>, <AES>), <Encryption Password>)

<Delete>

<Retrieve Printer Mngt. Information from Host>

<On>, <Off>

<Reject SNMP Packets While in Sleep Mode>

<On>, <Off>

<Format Host Resources MIB to RFC2790>

<On>, <Off>

<Dedicated Port Settings>

<On>, <Off>

<Dedicated Port Authentication Method>

<Mode 1>, <Mode 2>

<Use Spool Function>

<On>, <Off>

<Waiting Time for Connection at Startup>

0 to 300 sec.

<Ethernet Driver Settings>

<Auto Detect>: <On>, <Off>

<Current Transmission Speed>: Display Only

<MAC Address>: Display only

<Sleep Mode Priority Settings>

<Exit Speed>, <Energy Saving>

<Use IEEE 802.1X>

<On>, <Off>

<Login Name>

Login Name

<Verify Authentication Server Certificate>

<On>, <Off>

<Verify Authentication Server Name>

<On>, <Off>

<Authentication Server Name>

Authentication Server Name

<Use TLS>

<On>, <Off>

<Key and Certificate>

Set as Default Key

<Certificate Details> (<Version>, <Serial Number>, <Signature Algorithm>, <Issued To>, <Validity Start Date>, <Validity End Date>, <Issuer>, <Public Key>, <Certificate Thumbprint>, <Issued To (Altn. Name)>, <Verify Certificate>)

<Display Use Location> (Key and Certificate)

<Use TTLS>

<On>, <Off>

<Use PEAP>

<On>, <Off>

<User Name>

Name of the user to be authenticated with IEEE802.1X authentication

<Password>

Password of the user to be authenticated with IEEE802.1X authentication

<Same User Name as Login Name>

<On>, <Off>

<Outbound Filter>

<Use Filter>: <On>, <Off>

<Default Policy>: <Allow>, <Reject>

<Register> (Up to 16 IPv4 addresses), <Edit>, <Delete>

<Inbound Filter>

<Use Filter>: <On>, <Off>

<Default Policy>: <Allow>, <Reject>

<Register> (Up to 16 IPv4 addresses), <Details/Edit>, <Delete>

<Always Allow Sending/Receiving Using ICMP>

<On>, <Off>

<Outbound Filter>

<Use Filter>: <On>, <Off>

<Default Policy>: <Allow>, <Reject>

<Register> (Up to 16 IPv6 addresses), <Edit>, <Delete>

<Inbound Filter>

<Use Filter>: <On>, <Off>

<Default Policy>: <Allow>, <Reject>

<Register> (Up to 16 IPv6 addresses), <Details/Edit>, <Delete>

<Always Allow Sending/Receiving Using ICMPv6>

<On>, <Off>

<Outbound Filter>

<Use Filter>: <On>, <Off>

<Default Policy>: <Allow>, <Reject>

<Register> (Up to 100 Mac addresses), <Edit>, <Delete>

<Inbound Filter>

<Use Filter>: <On>, <Off>

<Default Policy>: <Allow>, <Reject>

<Register> (Up to 100 Mac addresses), <Edit>, <Delete>

<IP Address Block Log>

<Date>, <Type>, <IP Address>, <Port Number>, <Result>, <Display IP Address>

<Use Mopria>

<On>, <Off>

<Use AirPrint>

<On>, <Off>

<Google Cloud Print Settings>

<On>, <Off>

<Device Position Information Settings>

<Latitude>: Specify the latitude.

<Longitude>: Specify the longitude.

<Select Wired/Wireless LAN>

<Wired LAN>, <Wireless LAN>, <Wired LAN + Wireless LAN>

<WPS Push Button Mode>

<WPS PIN Code Mode>

<Other (Set Manually)>

<Select Access Point>

Select the access point and security type from the list

WEP authentication: <Enter Network Key (WEP)> (<WEP Key>: Enter the WEP key)

WPA/WPA2-PSK encryption: <Enter Network Key (PSK)> (<PSK>: Enter the WPA/WPA2-PSK Passphrase)

<Enter Manually>

<SSID>: Enter SSID

<Security Settings>: <None>, <WEP>, <WPA/WPA2-PSK>, <WPA/WPA2-EAP>

<Wireless LAN Information>

<Display All>

<Details>

<Power Save Mode>

<On>, <Off>

<Use Direct Connection>

<On>, <Off>

<Direct Connection Type>

<Access Point Mode>, <Wi-Fi Direct>

<Device Name for Wi-Fi Direct>

<Device Name for Wi-Fi Direct (Max 32 characters)>: Device Name

<Time Until Direct Connection Session Is Terminated>

0 = None, 1 to 30 to 60 min.

<Access Point Mode Settings>

<Use Personal SSID and Network Key>: <On>, <Off>

<Specify SSID to Use>: <On>, <Off>

<SSID>: Enter SSID

<Specify Network Key to Use>: <On>, <Off>

<Network Key>: Enter the network key

<Always Keep Enabled If SSID/Network Key Specified>

<On>, <Off>

<IP Address Settings for Direct Connection>

<Personal SSID and Network Key Settings>

<Specify SSID to Use>: <On>, <Off>

<SSID>: Enter personal SSID.

<Specify Network Key to Use>: <On>, <Off>

<Network Key>: Enter personal network key.

<Automatically Enable/Disable Direct Connection at Login/Logout>: <On>, <Off>

<Use Login Name as User Name for Print Jobs>

<On>, <Off>

<Use Bluetooth>

<On>, <Off>

<Beacon Settings>

<Use Beacon for Canon PRINT Business>: <On>, <Off>

<Use Beacon for AirPrint>: <On>, <Off>

<Set Device Name/PIN Code>

<Device Name>: Enter the device name
<PIN Code>: <Auto>, <Custom>

<Connection Timeout>

0 = None, 1 to 20 to 30 sec.

<Display MAC Address>

Displays the MAC address

<Connected Device Information>

Displays the information of the Bluetooth-connected device

<IP Address Settings>

<DHCP>: <On>, <Off>

<IP Address>: <0.0.0.0>

<Subnet Mask>: <0.0.0.0>

<Priority Line for Communication with Mobile Devices>

<Main Line (Wired LAN)>, <Sub Line (Wireless LAN)>

<Restrict Functions for Sub Line>

<On>, <Off>