Paper Jams in the Feeder
Check the paper jam location on the screen, and follow the procedure below to remove the original.
1
Remove the originals in the original supply tray.
2
Check whether an original is jammed in the feeder cover.
|
|
Open the feeder cover.
 |
 |
If an original is jammed, gently pull it out in the direction of the arrow.
 If you cannot remove the jammed original, proceed to the next step without forcibly removing it.
|
3
Check whether an original is jammed in the original output tray.
|
|
Lift the original supply tray.
 |
|
|
If an original is jammed, gently pull it out in the direction of the arrow.
 |
 |
Return the original supply tray back into position.
|
4
After removing all jammed originals, close the feeder cover.
5
Lift up the feeder, and check if there is a jammed original.
|
|
Lift up the feeder, and check the position indicated by
 . |
|
|
If an original is jammed, gently pull it out in the direction of the arrow.
 |
6
Return the feeder to its original position.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.
 |
|
When closing the feeder, take care that your eyes are not exposed to light emitted through the platen glass.
|