Paper Jams in the Staple Finisher
1
Check whether paper is jammed in the finisher.
|
|
Open the front cover of the finisher.
 |
 |
Turn the green knob to feed the jammed paper to the output tray side.
 |
 |
If paper comes out of the output tray of the finisher, gently pull the paper out in the direction of the arrow.
 |
 |
Close the front cover of the finisher.
|
2
Slide the control panel to the right and lift the platen glass.
Hold the front edge of the platen glass and lift it gently.
3
Check whether paper is jammed in the reversing unit.
If paper is jammed, gently pull it out in the direction of the arrow.
4
Check whether paper is jammed in the delivery unit.
|
|
Open the cover of the buffer pass unit.
 |
|
|
If paper is jammed, gently pull it out in the direction of the arrow.
 |
|
|
Close the cover of the buffer pass unit.
|
5
Lower the platen glass and slide the control panel to the left.
Continue following the instructions on the screen to proceed with the interrupted operation or continue clearing paper jams.
 |
|
When closing the platen glass, do not hold its lateral sides. Doing so may cause your fingers to be caught under the platen glass, resulting in injury.
|