Configuring Scan Settings (Sending E-Mail)
Before configuring the machine for scanning to e-mail, check the setup flow shown below.
 |
|
 |
|
Make sure that the machine and the computer are correctly connected.
|
 |
||||
 |
 |
Make sure that you have the following information:
The IP address of the machine. Viewing Network Settings
An e-mail address to be registered as a destination.
Information about the e-mail server, including the SMTP server name, port numbers, whether authentication is required, and the user name and password for authentication.
 For more information about the e-mail server settings, contact your Internet service provider or Network Administrator.
|
||
|
|
||||
 |
 |
Make sure that the computer meets the following system requirements for the Send Setting Tool(sending e-mail):
Operating system
Windows Vista/7/8/10/Server 2008/Server 2012 Web browser
Microsoft Internet Explorer 7.0 or later Display
SVGA monitor (with at least 800 x 600 pixel screen resolution) that supports at least 256 colors Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.
Disabling HTTP Communication (MF249dw / MF246dn / MF237w) Disabling Remote UI (MF249dw / MF246dn / MF237w) |
||
|
|
||||
 |
 |
Set the machine configuration.
Configuring Basic E-Mail Settings Configuring Basic E-Mail Settings
Configuring E-Mail Communication Settings Configuring E-Mail Communication Settings
Configuring Detailed E-Mail Communication Settings (Authentication, Encryption, etc.) Configuring E-Mail Communication Settings
|