Preparing to Use the Machine as a Scanner

Make sure that the machine and your computer are connected and all software is installed. For how to check, see "MF Driver Installation Guide." To connect via a wireless or wired LAN, you must register this machine in MF Network Scanner Selector. Register by following the procedure below. This procedure is not required if the machine and your computer are connected via USB.
The scan function is not available if the machine and your computer are connected in an IPv6 environment. Use IPv4 or a USB connection.
1
Click  in the system tray.
2
Select the check box for the machine, and click [OK].
Up to ten computers can be connected at a time on a network to one product (scanner).
14KF-04C