Fixing Assembly

Dirt may adhere to the fixing units inside the machine and cause black streaks to appear on printouts. To clean the fixing unit, perform the following procedure. Note that you cannot clean the fixing unit when the machine has documents waiting to be printed. To clean the fixing unit, you need paper larger than plain A4 or Letter size paper. Set the paper in the manual feed slot before performing the following procedure.
Cleaning consumes the toner cartridge. Make sure that there is sufficient toner cartridge remaining beforehand.
It takes approximately 90 seconds to clean the fixing assembly.
1
Press .
2
Use / to select <Adjustment/Maintenance>, and press .
3
Select <Clean Fixing Assembly>, and press .
4
Load paper (A4/LTR or larger) in the manual feed slot, and press .
After cleaning is completed and the message <Finished.> appears, press  to return to the copy mode screen.
1525-06E