Configuring Ethernet Settings
Ethernet is a standard for communicating data in a local area network (LAN). You can set the communication mode (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX). In general, the machine can be used without changing the defaults (
Ethernet Driver Settings), but you can change these settings to suit your network environment.
1
Press
.
2
Use
/
to select <Network Settings>, and press
.
3
Select <Ethernet Driver Settings>
<Auto Detect>.
4
Select whether to configure Ethernet settings automatically or manually.
Configuring Ethernet settings automatically
Select <On>, and press
. The machine detects and automatically sets the communication mode and the Ethernet type that can be used.
Configuring Ethernet settings manually
1 | Select <Off>, and press . |
2 | Select the communication mode. <Half Duplex> Alternately sends and receives communication data. Select when the machine is connected to a networking device using half duplex. <Full Duplex> Simultaneously sends and receives communication data. Use this setting for most environments. |
3 | Select the Ethernet type. |
4 | Select <Apply>, and press . |
LINKS