Preferences
 | All the settings about the display are listed with short descriptions. Default settings are marked with a dagger (  ). |
 |
Asterisks (*)Settings marked with "*1" have different defaults depending on the country or region of purchase. Settings marked with "*2" are unavailable depending on the country or region of purchase. Settings marked with "*3" are only available for MF244dw / MF242dw. |
Display Settings
Contrast
Adjust the brightness of the display to suit the installation location of the machine.
Five Levels |
<Preferences> 
<Display Settings> <Contrast> Use 
/
to adjust the brightness Invert Screen Colors
Select <On> to invert the display colors. Select <On> if the display is hard to view even after the brightness was adjusted in <Contrast>.
Off On |
<Preferences> <Display Settings> <Invert Screen Colors> Select <On> or <Off> Millimeter/Inch Entry Switch*1
Select the unit of measurement.
Millimeter Inch |
<Preferences> <Display Settings> <Millimeter/Inch Entry Switch> Select <Millimeter> or <Inch> Notify to Check Paper Settings
Specify whether to display a message prompting you to check paper settings when loading paper into the paper drawer or manual feed slot.
Off On  |
<Preferences> <Display Settings> <Notify to Check Paper Settings> Select <Off> or <On> Gram/Pound Switch*2
Select the unit of measurement for the basis weight.
Gram Pound |
<Preferences> <Display Settings> <Gram/Pound Switch> Select <Gram> or <Pound> Notify to Clean Original Scanning Area*3
When set to <On>, a message is displayed for dirt or soiling on the original scanning area.
Off On |
<Preferences> <Display Settings> <Notify to Clean Original Scanning Area> Select <Off> or <On> Message Display Time
Specify the interval in seconds at which two different messages are alternately displayed.
1 to 2 to 5 (sec.) |
<Preferences> <Display Settings> <Message Display Time> Enter a number for the interval Scrolling Speed
Adjust the speed for scrolling the screen by selecting from three levels.
Slow Standard Fast |
<Preferences> <Display Settings> <Scrolling Speed> Select the speed Cursor Movement Type
Configure how the cursor moves after a character is entered on the screen. Select <Auto> to automatically move the cursor to the right of the entered character. Select <Manual> to manually move the cursor to the right of the entered character.
Auto Manual |
<Preferences> <Display Settings> <Cursor Movement Type> Select <Auto> or <Manual> Language*1
Select the display language used for the display, reports, and lists.
Chinese (Simplified) Chinese (Traditional) English French German Italian Japanese Korean Portuguese Spanish |
<Preferences> <Display Settings> <Language> Select a language Remote UI Language*1
Select the display language used for the Remote UI screens.
Chinese (Simplified) Chinese (Traditional) English French German Italian Japanese Korean Portuguese
Spanish |
<Preferences> <Display Settings> <Remote UI Language> Select a language