Preferences
 |
|
All the settings about the display are listed with short descriptions. Default settings are marked with a dagger (
 ). |
 |
Asterisks (*)Settings marked with "*1" are only available for the MF244dw.
Settings marked with "*2" have different defaults depending on the country or region of purchase.
Settings marked with "*3" are only available for the MF244dw / MF232w.
|
Display Settings
Contrast
Adjust the brightness of the display to suit the installation location of the machine.
|
Five Levels
|
<Preferences> 
<Display Settings> <Contrast> Use 
/
to adjust the brightness Invert Screen Colors
Select <On> to invert the display colors. Select <On> if the display is hard to view even after the brightness was adjusted in <Contrast>.
|
Off
On
|
<Preferences> <Display Settings> <Invert Screen Colors> Select <On> or <Off> Millimeter/Inch Entry Switch
Select the unit of measurement.
|
Millimeter
Inch
|
<Preferences> <Display Settings> <Millimeter/Inch Entry Switch> Select <Millimeter> or <Inch> Notify to Check Paper Settings
Specify whether to display a message prompting you to check paper settings when loading paper into the paper drawer or manual feed slot.
|
Off
On
 |
<Preferences> <Display Settings> <Notify to Check Paper Settings> Select <Off> or <On> Notify to Clean Original Scanning Area*1
When set to <On>, a message is displayed for dirt or soiling on the original scanning area.
|
Off
On
|
<Preferences> <Display Settings> <Notify to Clean Original Scanning Area> Select <Off> or <On> Message Display Time
Specify the interval in seconds at which two different messages are alternately displayed.
|
1 to 2
to 5 (sec.) |
<Preferences> <Display Settings> <Message Display Time> Enter a number for the interval Scrolling Speed
Adjust the speed for scrolling the screen by selecting from three levels.
|
Slow
Standard Fast |
<Preferences> <Display Settings> <Scrolling Speed> Select the speed Cursor Movement Type
Configure how the cursor moves after a character is entered on the screen. Select <Auto> to automatically move the cursor to the right of the entered character. Select <Manual> to manually move the cursor to the right of the entered character.
|
Auto
Manual
|
<Preferences> <Display Settings> <Cursor Movement Type> Select <Auto> or <Manual> Language*2
Select the display language used for the display, reports, and lists.
|
Arabic, Basque, Bulgarian, Catalan, Chinese (Simplified), Chinese (Traditional), Croatian, Czech, Danish, Dutch, English
, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, Slovak, Slovene, Spanish, Swedish, Turkish |
<Preferences> <Display Settings> <Language> Select a language Remote UI Language*2*3
Select the display language used for the Remote UI screens.
|
Chinese (Simplified), Chinese (Traditional), Czech, Danish, Dutch, English
, Finnish, French, German, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Russian, Spanish, Swedish, Turkish |
<Preferences> <Display Settings> <Remote UI Language> Select a language