Replacing the Staple Case in the Stapler Unit (Staple Finisher-X/Booklet Finisher-X)
1
Open the front cover of the finisher.
2
Pull out the staple cartridge.
Hold the green tab on the staple cartridge and pull it straight out.
3
Remove the empty staple case from the staple cartridge.
4
Remove the new staple case from its box.
Remove the seal that holds the staples together after you place the staple case into the staple cartridge.
5
Load the new staple case to the staple cartridge.
6
Hold the green tab on the staple cartridge and push it in as far as it will go.
7
Close the front cover of the finisher.