Scanning Large Originals from the Platen
You can scan originals that are larger than the platen by scanning the right and left halves and combining them into one image. Originals up to about twice the size of the platen are supported.
1.
In the main screen of the MF Scan Utility, select the device you are using from [Product Name]/[Scanner].
2.
If necessary, click [Settings] and configure detailed settings.
Click [Stitch] in the [
] (Scanning from a computer) sheet → set the relevant items in [Scan Options]/[Save Settings]/[Application Settings] → click [OK].
] (Scanning from a computer) sheet → set the relevant items in [Scan Options]/[Save Settings]/[Application Settings] → click [OK].3.
Click [Scan and Stitch].
4.
In the [Image Stitch] dialog box, set [Select Output Size]/[Scan Direction].
5.
Set the first section of the original to be scanned in the device.
Set the left or right side of the original on the platen according to the direction you set for [Scan Direction] (the direction displayed as "1" in the preview area).
6.
Click [Start Scanning Image 1].
Scanned image 1 is displayed in the preview.
7.
Set the next section of the original to be scanned in the device.
8.
Click [Start Scanning Image 2].
Scanned image 2 is displayed in the preview.
9.
If necessary, adjust the scanned images.
To adjust the area to save: select [Adjust cropping frames], then drag the cropping frame (the dotted-line border) in the preview.
To adjust the layout: drag the image.
To rotate and enlarge/reduce the image: click [
] in the tool bar.
] in the tool bar.To re-scan: click [
] in the tool bar.
] in the tool bar.10.
Click [Save].
The combined image is saved.