Entering Sleep Mode
The sleep mode function reduces the amount of power consumed by the machine by disabling power flow to the operation panel. If no operations will be performed on the machine for a while, such as during a lunch break, you can save power simply by pressing 
on the operation panel. You can also use the Auto Sleep Time setting to automatically put the machine into sleep mode if it remains idle for a specified length of time.
on the operation panel. You can also use the Auto Sleep Time setting to automatically put the machine into sleep mode if it remains idle for a specified length of time. 
|
When in sleep modeWhen the machine enters sleep mode, lights up green.Situations in which the machine does not enter sleep modeWhen the machine is in operation When the [Processing/Data] indicator is lit up or blinking When the machine is performing an operation such as adjustment or cleaning When a paper jam occurs When the menu screen is displayed When an error message is displayed on the screen (There are some exceptions. The machine sometimes enters sleep mode when error messages are displayed.) When the machine is waiting for a wireless LAN connection or Direct Connection |
When You Want to Set the Auto Sleep Timer
The factory default settings for the amount of time that elapses before the machine enters auto sleep mode are listed below. We recommend using the factory default settings to save the most power. If you want to change the amount of time that elapses before the machine enters auto sleep mode, follow the procedure below.
1 minute (setting range is 1 to 30 minutes)
<Timer Settings> 
<Auto Sleep Time> Set the amount of time that elapses before the machine automatically enters sleep mode 
Exiting Sleep Mode
Press . You can also press any key other than to exit sleep mode.
. You can also press any key other than to exit sleep mode.