Editing the LDAP Server Settings

You can manage the LDAP server settings.
IMPORTANT
Specifying the LDAP server settings is available only when the Remote UI is in the System Manager Mode.
NOTE
For instructions on how to edit the LDAP server settings on the machine’s control panel, see Setting up the Machine for Your Network Environment.
1
Click [Add.Func.] → [Register LDAP Server] in the [Add.Func.] menu.
The Register LDAP Server page is displayed.
2
Edit the LDAP server settings.
To register a new LDAP server:
1
Click [] (Register) on the page shown in step 1.
The Register LDAP Server (or Register LDAP Search Server) page is displayed.
2
Specify the necessary settings → click [OK].
NOTE:
For information on the settings, see Setting up the Machine for Your Network Environment.
If Authorized Send is activated, <Authentication Method> appears on this page. Specify whether to carry over the login information (user name and password) from Authorized Send to the authentication information used when users search for e-mail addresses and fax numbers via the LDAP server. To use the same user name and password for LDAP search authentication, select [Assume the same authentication information as when operation to send was started]. If not, select [Use device-specific authentication information].
To edit the LDAP server:
1
Click the LDAP server name you want to edit on the page shown in step 1.
The Edit LDAP Server (or Edit LDAP Search Server) page is displayed.
2
Edit the settings as necessary → click [OK].
To delete the LDAP server:
1
On the page shown in step 1, click [] (Select) next to the LDAP server you want to delete → [] (Delete).
The selected LDAP server is deleted.
To register or edit the LDAP search attributes:
1
Click [Register/Edit LDAP Search Attributes] on the page shown in step 1.
The Register/Edit LDAP Search Attributes page is displayed.
2
Specify or edit the necessary settings → click [OK].
NOTE:
For information on the settings, see Setting up the Machine for Your Network Environment.
4HLK-054