Setting a Remote UI PIN

You can set a PIN for access to the Remote UI. All users use a common PIN.
When Department ID Management is enabled, setting here is not required. Setting the Department ID Management
1
Press  ().
2
Use / to select <Network>, and press .
When a message appears, press .
3
Select <Remote UI Settings> <RUI Access Sec. Set.>.
4
Select <On>, and press .
5
Set a PIN.
Enter up to 7 digits and press .
As <Confirm PIN> is displayed for confirmation, enter again the same PIN digits.
If Remote UI settings are initialized
The Remote UI Access PIN is also initialized. After an initialization, reset the PIN. Initializing Menu
16FC-043