Checking Status and Log for Sent and Received Documents
The statuses and communication logs for sent and received fax and I-Fax documents can be checked separately for sending and receiving.
|
|
|
When <Display Job Log> is set to <Off>, you cannot check the communication logs. <Display Job Log>
|
1
Select <Status Monitor>.
2
Select <TX Job> or <RX Job>.
3
Check the statuses and communication logs for sent and received documents.
To check the statuses for sent and received documents
|
1
|
Select the document whose status you want to check in the <TX Job Status> or <RX Job Status> tab.
/b_dis182.gif) Displays detailed information about the document.
If you specified multiple destinations, the number of specified destinations is displayed on the screen. To check the details of specified multiple destinations, select <Destination>.
|
To check the communication logs for sent and received documents
|
1
|
Select the document whose log you want to check in the <TX Job Log> or <RX Job Log> tab.
<OK> is displayed when a document was sent or received successfully, and <Error> is displayed when a document failed to be sent or received because it was canceled or there was some error.
/b_dis184.gif) Displays detailed information about the document.
 When a three-digit number is shown in the case of <Error>
This number represents an error code. Countermeasures for Each Error Code
|