Adjusting the Color

Adjust the density of yellow, magenta, cyan, and black separately.

Place the original. Placing Originals

Press <Options> on the Copy Basic Features screen. Copy Basic Features Screen

Press <Color Balance>.

Press <-> or <+> for each color to adjust the color balance.

Press <Fine Adjust Density>, and perform other adjustments as necessary.

Select a color and adjust its density level by its density area using the <-> or <+> button. When adjustment is complete, press <OK>.

Press <OK>

<Close>.

Press

(Start).

Copying starts.

TIPS
You can register up to four settings after adjustment. After adjusting the color, press <Recall/Register> select a button from <C1> to <C4> press <Register> <Yes> <OK>. To recall registered settings, press <Recall/Register>, select a button, and press <OK>. You can change the button names of <C1> to <C4>. Select the button to change, press <Rename>, and enter a new name. To delete registered settings, select the button press <Delete> <Yes>.

TIPS

You can register up to four settings after adjustment. After adjusting the color, press <Recall/Register>

select a button from <C1> to <C4>

press <Register>

<Yes>

<OK>.

To recall registered settings, press <Recall/Register>, select a button, and press <OK>.

You can change the button names of <C1> to <C4>. Select the button to change, press <Rename>, and enter a new name.

To delete registered settings, select the button

press <Delete>

<Yes>.