Registering the Key and Certificate for Network Communication
You can obtain the key and certificate, and the CA certificate from a certification authority (CA) for use with the machine. Install and register the obtained key and certificate file and CA certificate file in this machine using Remote UI. Check the key and certificate, and CA certificate conditions that are required for the machine in advance. (Management Functions).
|
For more information about the basic operations to be performed when setting the machine from the Remote UI, see Setting Up Menu Options from Remote UI. |
1
Start the Remote UI and log in to System Manager Mode. Starting Remote UI
2
Click [Settings/Registration] on the Portal page. Remote UI Screen
3
Select [Device Management] 
[Key and Certificate Settings] or [CA Certificate Settings].
[Key and Certificate Settings] or [CA Certificate Settings].Click [Key and Certificate Settings] to install a key and certificate, or [CA Certificate Settings] to install a CA certificate.
4
Click [Register Key and Certificate] or [Register CA Certificate].
Deleting a registered key and certificate or CA certificate
Click [Delete] on the right of the key and certificate or CA certificate you want to delete click [OK]. You cannot delete the preinstalled CA certificates.
click [OK]. You cannot delete the preinstalled CA certificates.A key and certificate cannot be deleted if it is currently used for some purpose, such as when "[TLS]" or "[IEEE 802.1X]" is displayed under [Key Usage]. In this case, disable the function or replace the key and certificate before deleting it.
Disabling or enabling the preinstalled CA certificates
Click [Disable] on the right of the preinstalled CA certificate you want to disable. To enable the certificate again, click [Enable] on the right of the certificate.
5
Click [Install].
Deleting the key and certificate file or CA certificate file
Click [Delete] on the right of the file you want to delete click [OK].
click [OK].6
Click [Browse], specify the file to install, and click [Start Installation].
The key and certificate file or the CA certificate file is installed on the machine from a computer.
7
Register the key and certificate or CA certificate.
Registering a key and certificate
1 | Click [Register] on the right of the key and certificate file you want to register. |
2 | Enter the name of the key and password.  [Key Name] Enter alphanumeric characters for the name of the key to be registered. [Password] Enter alphanumeric characters for the password of the private key set for the file to be registered. |
3 | Click [OK]. |
Registering a CA certificate
Click [Register] on the right of the CA certificate file you want to register.