List of Messages

This section includes error codes, message IDs, and descriptions of the errors that occur when executing the installer.
NOTE
In some cases, it may not be possible to resolve the problem with the steps described here.
The specified parameter is duplicated.
Cause
The same startup parameter was specified multiple times when executing an installation with the command line.
Remedy
Check the startup command and edit it so that the same parameter is not specified multiple times.
The specified parameter is incorrect.
Cause
An incorrect command option was specified in the startup parameters when executing an installation with the command line.
Remedy
Check the startup command.
A subparameter that cannot be specified in this command was specified.
Cause
A parameter not starting with "/" was specified after a startup parameter other than "/qn".
Remedy
Check the startup command.
More than one operating mode parameter was specified for the specified command.
Cause
More than one of "/i", "/x", "/f", and "/fa" was specified in the startup parameters when executing an installation with the command line.
Remedy
Check the startup command. Only one parameter can be specified to specify the operation mode.
A valid operating mode parameter is not specified.
Cause
The operation mode was not specified when executing an installation with the command line.
Remedy
"/i" or "/x" must be specified when starting in the silent mode.
A command parameter that cannot be used under the current environment was specified.
Cause
A startup parameter not supported by the environment was specified when executing an installation with the command line.
Remedy
Check the environment to install to and edit the startup command.
Cannot read the following file.
{0}
OS Error Code: {1}
OS Error Message: {2}
Cause
The settings file could not be loaded when starting the installer.
Remedy
Check the settings file.
The following file format is incorrect.
{0}
Cause
There is an incorrect format in the definitions in "setup.ini".
Remedy
Check the content of "setup.ini".
Could not read the settings file for silent mode.
Cause
The specified detailed parameter file could not be found when starting the installer in the silent mode.
Remedy
Confirm that the detailed parameter file is in the proscribed location.
Confirm that the name of the file is the same as the file name specified in the command.
Check the detailed parameter file.
The format of the settings file for silent mode is incorrect.
{0}
Cause
The format of the detailed parameter file for the silent mode is invalid.
Remedy
Check the content of the detailed parameter file.
Cannot start administrator mode in silent mode.
Cause
You executed a silent installation with the command line with the same version of Desktop already installed.
Remedy
Check the startup command.
Could not read language resource file.
If you used the compressed installation program, some of the files may have been corrupted when the files were opened.
Try to open the compressed files again.
Cause
The specified language resource file could not be loaded when executing an installation with the command line.
Remedy
Confirm that the language resource file is in the proscribed location in the folder structure of the installer.
Check the language codes specified in "setup.ini" or the detailed parameter file.
Could not read selected language resource file ({0}).
If you used the compressed installation program, some of the files may have been corrupted when the files were opened.
Try to open the compressed files again.
Cause
The resource file for the language that the user selected or installed could not be loaded.
Remedy
Confirm that the language resource file is in the proscribed location in the folder structure of the installer.
Confirm that the language resource file exists in the "LangPack" folder in the installation folder of Desktop.
19HW-117