Print Settings
You can select the paper to use, set 2-sided printing, and configure other settings.
* Some items may not be displayed depending on the model and application.
[Paper Size]
Set the paper size to be used.
When Selecting [Custom] and Directly Entering the Size
You can freely define the length of each side within the range supported by the machine.
1 | In [Custom], select [Specify in Millimeters] or [Specify in Inches]. |
2 | Enter values for [Set Length for X] and [Set Length for Y]. |
When Selecting [Custom] and Using Custom Size Paper Registered in the Machine
1 | In [Custom], select [Use Custom Size Registered in Device]. |
2 | In [Registered Name], select from [S1] to [S3]. |
You may not be able to enter the size depending on your model. In this case, you first need to register the [S1] custom paper setting on the control panel.
To select [Use Custom Size Registered in Device], you first need to register the [S1] to [S3] custom paper settings on the control panel.
[2-Sided Printing]
Select whether to use 2-sided printing.
[Binding Location]
When the printed document will be bound using a method such as staples, specify whether to bind the paper on the long edge or the short edge.
[Color Mode]
Select the color mode (Black & White or Color) for printing.
[Number of Copies]
Set the number of copies to print.